Publish Time: 2020-04-07 Origin: Site
| Problem | Solution |
| The cutting material or the machine is not fix well,which causes the blade to twist or jam during cuting | Maintain a firm grip on the material and secure the machine firmly. |
| The blade is not cutting in a straight line | Align the machine properly to avoid twisting the blade in the cut process. |
| Water supply to the blade is not enough | Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both sides fo the blade. |
| Defective flange causes the blade to flutter in the cut. | Replace the flange |
| The bone matrix is too hard for the cutting marerial | Use a blade with a softer bond matrix. |
More details please contact us.
INFO@SANGTOOLS.COM
0086-595-22699555