Diamond grinding segment maintenance methods and precautions

It is widely used in the efficient grinding and polishing of non-metallic hard and brittle materials such as terrazzo floor, marble, granite, refractory brick, terrazzo, and concrete products, with good sharpness, long life, and high working efficiency. But a diamond grinding segment of the maintenance methods and precautions do you know? Here is the content list.

Here is the content list:

l Cautions

l Maintenance method

Cautions

When the diamond grinding puck is stopped in operation, it should be put flat or suspended by the inner hole, and no objects should be placed on the saw blade that is put flat.

When found diamond grinding segment because of operation for a long time and no longer sharp, cutting surface rough, need to grind its leveling. But it should be noted that resharpening cannot change the original angle of the diamond grinding shoe, otherwise it will destroy the dynamic balance.

When there is a problem with the inner diameter of the diamond grinding segment, positioning hole processing, etc., the need to repair must be carried out by the factory. Otherwise, because of unprofessional and lead to poor processing, will affect the diamond grinding segment use effect, and may bring safety risks to the operator, reaming conventional on not more than the original hole diameter 20mm, so as not to affect the balance of stress.

Maintenance method

Diamond grinding segment such as not immediately use should be removed from the machine coated with anti-rust oil after flat or use the inner hole to hang it up, the flat diamond grinding head cannot be stacked on other items or footsteps, and to pay attention to moisture, anti-rust corrosion.　

When the diamond grinding segment is no longer sharp, grinding surface rough, must promptly remove it from the saw table and send to the diamond grinding segment manufacturers for re-sharpening. The segmented grinding wheel is a grinding tool, its requirements for dynamic balance are quite high, please do not give the diamond grinding segment to non-professional manufacturers for resharpening, resharpening cannot change the original angle, and destroy the dynamic balance.

The diamond grinding segment of the inner diameter correction, positioning hole processing, etc., must be left to the original manufacturer to carry out. If the processing is not good, it will seriously affect the service life and use the effect of the diamond grinding segment, and may lead to the risk of personal property damage, reaming in principle cannot exceed the original hole diameter of 20mm, so as not to affect the balance of stress.

QuanZhou Sang Diamond Tools Co., Ltd recommends you follow the above information and maintain the diamond grinding segment properly. All of our products are tested several times before they leave the factory, so our products are of excellent quality, safe and reliable. If you want to buy our high-quality products, you can contact us.